Page 1 of 1

Skyrim SE

Posted: Tue Oct 22, 2019 4:37 am
by polts
I have Skyrim SE installed on my drive (Steam) with ENB and Script extender but 3D fix manager does not list it in my installed games. I have also Skyrim regular edition installed and this version I can see it on the list. What is the problem ?

Re: Skyrim SE

Posted: Tue Oct 22, 2019 12:14 pm
by Blacksmith60
The problem might relate to the enb, which conflicts with 3dMigoto, they both uses d3dx.ini, try install it manually or remove the enb.

I have never been able to use both at once, if need be you can use Reshade!
But there's so many great mods out there, that makes it up for enb IMO, I use Obsidian Weathers along with several misty mods, I feel it has the Skyrim vibe allright :)

Re: Skyrim SE

Posted: Tue Oct 22, 2019 4:48 pm
by polts
Ok, so I removed all ENB files and folder and the game is still missing from the list.

Is there someone who plays Skyrim SE on 3D ? What is your setup ? Could it be wrye bash ?

Edit : I installed manually the files in the folder and the game is running well in 3D but still missing from the list of games installed. Weird !

Re: Skyrim SE

Posted: Tue Oct 22, 2019 6:48 pm
by schwing
3DFM seems to be using the Add/Remove Programs list. If your game isn't there, then it won't show up in 3DFM. This happened to me because of dualboot and launching a game doesn't seem to add it to the list.

Re: Skyrim SE

Posted: Wed Oct 23, 2019 7:02 pm
by polts
WOW, this game looks AMAZING in 3D. Fully modded, this is way better than the VR version.

Re: Skyrim SE

Posted: Wed Oct 23, 2019 8:41 pm
by schwing
The VR version is based on SkyrimSE and can be modded. SKSE VR and SkyUI VR work fine as well as other mods. But I agree, the depth is noticeably worse in VR.

Re: Skyrim SE

Posted: Wed Oct 23, 2019 9:50 pm
by bo3bber
I don't have access to the SE version, but I can say that there is a specific SE profile for 3DFM/HelixVision.

Usually these are setup with Steam installs in mind, so if your game is from some other store, the paths may be different.

Current profile looks for:
Install dir: Skyrim Special Edition
Launcher exe: skyrimse.exe

If you have anything different than those, 3DFM won't find the game automatically.

You can always add a new profile with New in the lower left.

schwing wrote:3DFM seems to be using the Add/Remove Programs list. If your game isn't there, then it won't show up in 3DFM. This happened to me because of dualboot and launching a game doesn't seem to add it to the list.
It is actually using more than that, it starts by using the install paths from the registry for Steam, Origin, uPlay, GoG default locations (and guesses for Epic Game Store, no registry).

Then uses the paths and exes to try narrow down games that are installed.

Some paths and profiles get broken as people like Epic make arbitrary changes to file and path names that break the lookup mechanism. As I find these, I'm updating the profiles to match. Some I've added duplicate profiles like for Rime because they broke the entire structure with a bizarre extra level of \Rime.

(HelixVision will always include the latest from top-of-tree builds, and 3DFM updates will depend upon PaulDusler's update cycle.)

Re: Skyrim SE

Posted: Thu Oct 24, 2019 9:28 am
by Blacksmith60
@polts More than amazing, I have 1152 mods installed (700 esp), it's rockstable thanks to SSE's engine :woot

A couple of pictures would have been appropriate, but I'm not sure how to do it in here!
Well, if it just could be a little bigger...

Re: Skyrim SE

Posted: Sun May 24, 2020 5:41 am
by bobisz

Did anyone ever manage to get 3D + ENB working together?

I followed some comments on the Helixmod (back from 2018t) o set up both suing a proxy call but to no avail.

I have the 3Dfix d3d11.dll in the game folder, also have the enb's d3d11.dll renamed to d3d11_enb.dll.
In d3dx.ini I enable proxy: proxy_d3d11=d3d11_enb.dll

This way the game has full 3d and I get the ENB's config overlay to show up as well, but the enb effects doesn't work at all.

Re: Skyrim SE

Posted: Mon May 25, 2020 5:16 pm
by kakashisensei
I have gotten 3D + skyrim ENB to work quite well, but some caveats. This is for Skyrim LE, not SE. I have never tried with SE so I can't comment. Since SE is probably using much newer ENBs from the start, I think it may not work. This requires a setting (forcefakevideocard) that the ENB creator dropped in v262.

First, I never could get 3d vision to work with ENB. I have tried with/without 3dvision fixes and with different ENB settings (forcefakevideocard). The issue has been that some of the ENB effects get rendered at different depths in 3D. So you get alot of ghosting. I had to use tridef and with a profile I found in their now defunct forum. I tweaked the profile a bit. I can share with you. Second, you must use the ENB injector method and not wrapper (d3d9.dll). With windows 10, I believe the newest injector stopped working. I have gone back to using Boris's ENB v004 injector and it works great. Tridef is also defunct now, but if you look at the tridef subreddit, there is a post on how to setup a working copy. Last, the ENB must be downgraded to ENB v262 and you must turn on forcefakevideocard setting.

Because its an older v262 enb, it may not look as good. Some effects didn't work properly in 3D with forcefakevideocard, like fog or water. It didn't look that bad, just not as good as with that setting off.

Re: Skyrim SE

Posted: Tue May 26, 2020 8:11 am
by bobisz
That's very kind of you, but yes, SE does use a specific ENB version.

At this point I'm just hoping that maybe this thread catches either bo3b's or Qwinn's eye who he helped on the helix blog back then. But given it's been more than 2 years... fat chance.
I was following his direction which involved Fallout4 fix files to set this up, but it no longer seem to work. Maybe it is because the enb version I'm using is much more recent than what was available in 2018 when they solved this.

Re: Skyrim SE

Posted: Sun Oct 11, 2020 1:24 am
by jia1009
3D + ENB can not working ,is any ong can help me?

Re: Skyrim SE

Posted: Sun Oct 11, 2020 6:55 am
by Blacksmith60
Sorry but it's not possible atm, try Reshade 4.7 instead it works flawless, and shaders like MXao (Sao) makes Skyrim very beautifull :)

Re: Skyrim SE

Posted: Tue Oct 13, 2020 12:00 am
by jia1009
3d + enb both working step:

1、 Unzip the contents of the fix in the root folder of the game ("Skyrim Special Edition"), where "SkyrimSE.exe" is.( ... dfix_v8.7z),setup the proxy in the d3dx.ini.
like this(;proxy_d3d11=d3d11_helix.dll = proxy_d3d11=d3d11_helix.dll)。

2、Download this file,copy this d3d11.dll to game folder(

3、Download your enb files, copy to game folder (exclude d3d11.dll)

4、Download enb 343 ( ... bArKW/view),rename the d3d11.dll as d3d11_helix.dll, just copy d3d11_helix.dll to game folder.

enjoy your game.