lens machine achived
- 3dpmaster
- Cross Eyed!
- Posts: 116
- Joined: Tue Sep 21, 2010 3:05 pm
lens machine achived
Finally after 4 years of waiting and research, the machine is ready to make much better diy optics. I couldn't finger it out with a normal lathe (one axis motion). phantograph and spheric path follower were too rigid. I've chosen the longest way but it was worth it!
You do not have the required permissions to view the files attached to this post.
Full immersive research:
HMD:
SONY HMZ-T1
FOV: 40° diagonal
HMD project:
FOV: >180°
Link: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=14332
HMD:
SONY HMZ-T1
FOV: 40° diagonal
HMD project:
FOV: >180°
Link: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=14332
- 3dpmaster
- Cross Eyed!
- Posts: 116
- Joined: Tue Sep 21, 2010 3:05 pm
Re: lens machine achived
First lens achived! (just to test the limits before going further).
You do not have the required permissions to view the files attached to this post.
Full immersive research:
HMD:
SONY HMZ-T1
FOV: 40° diagonal
HMD project:
FOV: >180°
Link: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=14332
HMD:
SONY HMZ-T1
FOV: 40° diagonal
HMD project:
FOV: >180°
Link: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=14332