Hello there,
I'm trying to set up skyrim in vr with vireio 2 but I am not able to run the game with the correct distortion. I do not own the dk2, but judging by other dk2 games I've seen the distortion and chromatic correction seem as though the distortion is the one used for the dk1. How can I fix this?
Thank you
Vireio starts game in dk1 with dk2 distortion
-
- One Eyed Hopeful
- Posts: 8
- Joined: Thu Aug 09, 2012 3:03 pm
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: Vireio starts game in dk1 with dk2 distortion
Not sure I understand your problem.
Vireio will auto-detect the attached HMD, if you don't have any HMD attached (or turned on) then you will get "NO HMD DETECTED" and it should be defaulting to the configuration for the DK1. This would obviously be the incorrect distortion and chromatic aberration for the DK2, but as you don't have a DK2 atached, it doesn't matter.
If you did have a DK2 attached, then it would have detected that, and set the distortion and chromatic aberration accordingly.
Vireio will auto-detect the attached HMD, if you don't have any HMD attached (or turned on) then you will get "NO HMD DETECTED" and it should be defaulting to the configuration for the DK1. This would obviously be the incorrect distortion and chromatic aberration for the DK2, but as you don't have a DK2 atached, it doesn't matter.
If you did have a DK2 attached, then it would have detected that, and set the distortion and chromatic aberration accordingly.