Cyberith Virtualizer ODT
- djesko
- One Eyed Hopeful
- Posts: 10
- Joined: Fri May 31, 2013 3:34 pm
- Location: Scotland
Cyberith Virtualizer ODT
https://www.youtube.com/watch?v=emJCq0mc5TA
An early prototype but looks promising.
An early prototype but looks promising.
Star Citizen Oculus Rift clan [HMD]
- cybereality
- 3D Angel Eyes (Moderator)
- Posts: 11407
- Joined: Sat Apr 12, 2008 8:18 pm
Re: Cyberith Virtualizer ODT
Interesting. Seems ODTs are the hot topic right now.
-
- Two Eyed Hopeful
- Posts: 78
- Joined: Wed Dec 14, 2011 8:33 am
Re: Cyberith Virtualizer ODT
this ODT has so many potential to become the best affordable treadmill: you can crouch and do freedom to do a whole lot movement, you walk on a flat surface, not on a slope! I totally felt in love with this design. However, I don't know what is the material of the surface? did the sock sliding really work? Any way, this already looks great Hope they will release a commercial product soon!
- colocolo
- Diamond Eyed Freakazoid!
- Posts: 790
- Joined: Mon Jun 04, 2012 1:25 am
Re: Cyberith Virtualizer ODT
i think the surface is made of ordinary steel. It takes not that much effort to walk like that if you have the right support. if you have tiled floor or parquet try to grab a doorframe and you can walk likeadventurer wrote:this ODT has so many potential to become the best affordable treadmill: you can crouch and do freedom to do a whole lot movement, you walk on a flat surface, not on a slope! I totally felt in love with this design. However, I don't know what is the material of the surface? did the sock sliding really work? Any way, this already looks great Hope they will release a commercial product soon!
that on socks.
It works great and looks cheap but i could imagine that it would take to much physical effort to move. But this sth tweakable.
EDIT: there is some plastic film on the surface.
- android78
- Certif-Eyable!
- Posts: 990
- Joined: Sat Dec 22, 2007 3:38 am
Re: Cyberith Virtualizer ODT
Have to say that this is my favorite design so far. It looks like a bit of effort to walk, but should be ok. Looks like they're using a flexible nylon stretched over the square metal frame. You can actually see it flexing as he walks on it.
I'm wondering if nylon casters on the bottom of some shoes combined with just a square of carpet could work as well (or better).
One thing though, I'd want to put some signifficant rubber capping on thost poles. Wouldn't want to whack your head on one when you fall over wearing the rift! A better solution (but more costly) then the poles would be something like:
I'm wondering if nylon casters on the bottom of some shoes combined with just a square of carpet could work as well (or better).
One thing though, I'd want to put some signifficant rubber capping on thost poles. Wouldn't want to whack your head on one when you fall over wearing the rift! A better solution (but more costly) then the poles would be something like:
You do not have the required permissions to view the files attached to this post.
-
- One Eyed Hopeful
- Posts: 17
- Joined: Sun Mar 10, 2013 7:46 pm
Re: Cyberith Virtualizer ODT
Friction will eventually wear off the socks. All he needs to is to use a WizzDish instead of sock on metal and its perfect.
- blazespinnaker
- Certif-Eyed!
- Posts: 541
- Joined: Sat Sep 01, 2012 11:53 pm
Re: Cyberith Virtualizer ODT
Seems less likely to generate injury than the omni, but I have found that harnesses are immersion breaking. They chaff and are quite noisy (if not in sound then in vibration) Though you have a gait of sorts, your feet sliding doesn't feel natural, it sends signals to your brain that you are in danger of falling.
I don't want to sound negative but I am surprised people aren't trying a more simple approach.
I don't want to sound negative but I am surprised people aren't trying a more simple approach.
Gear VR: Maybe OVR isn't so evil after all!
- android78
- Certif-Eyable!
- Posts: 990
- Joined: Sat Dec 22, 2007 3:38 am
Re: Cyberith Virtualizer ODT
If you're referring to the idea of a floating hamsterball, then that isn't without its own issues. Such as getting the cables inside it and, to a lesser extent, getting the control signals.blazespinnaker wrote:Seems less likely to generate injury than the omni, but I have found that harnesses are immersion breaking. They chaff and are quite noisy (if not in sound then in vibration) Though you have a gait of sorts, your feet sliding doesn't feel natural, it sends signals to your brain that you are in danger of falling.
I don't want to sound negative but I am surprised people aren't trying a more simple approach.
If latency wasn't an issue, then you could use wireless, I guess.
I'm also worried about how long it would take for the carbon dioxide level inside a 10foot diameter ball to get to a dangerous level. I can imagine people passing out after playing for a couple of hours and possibly worse if not found.
These aren't cheap either and they say 3-12 min of air!
http://www.ebay.com.au/itm/Water-Walkin ... 998wt_1106
- blazespinnaker
- Certif-Eyed!
- Posts: 541
- Joined: Sat Sep 01, 2012 11:53 pm
Re: Cyberith Virtualizer ODT
Having been inside those balls, I can tell you - they're pretty bad, even if they have holes in them.
Until we get a real high friction ODT which has no latency and can virtually duplicate different inclines, then I think simple solutions that don't require any sort of sliding around or rig you have to buy (except for the Oculus Rift and a motion-cap system) will do just fine.
Until we get a real high friction ODT which has no latency and can virtually duplicate different inclines, then I think simple solutions that don't require any sort of sliding around or rig you have to buy (except for the Oculus Rift and a motion-cap system) will do just fine.
Gear VR: Maybe OVR isn't so evil after all!
- NightlHlawk
- One Eyed Hopeful
- Posts: 35
- Joined: Tue Jun 11, 2013 8:42 am
Re: Cyberith Virtualizer ODT
Wow, this looks very promising. Looking forward to seeing what the new design looks like!
- brantlew
- Petrif-Eyed
- Posts: 2221
- Joined: Sat Sep 17, 2011 9:23 pm
- Location: Menlo Park, CA
Re: Cyberith Virtualizer ODT
Interesting harness design. It looks like it offers almost no resistance during turning and the crouch/jump is a very nice feature. The step motion appears a bit strenuous. It seems like he really has to lean and push to get those feet moving, but maybe it's something that could be improved upon with the right materials - similar to what has been done with the Wiz and Omni. I'm certainly intrigued.
-
- Golden Eyed Wiseman! (or woman!)
- Posts: 1498
- Joined: Fri Jul 08, 2011 11:47 pm
Re: Cyberith Virtualizer ODT
I like this one a lot. The walking motion doesn't look too bad (could be improved with less friction as brantlew says) and hes put a bit of thought into the harness arrangement, which is more sophisticated than the Omni's. As blazespinnaker pointed out though, the noise and feel isn't so good for immersion (although, i'd still venture to say its better than having no crouch/jump) and as Android pointed out, those posts are an injury waiting to happen. He shouldn't be using it with those uncapped like that!
- baggyg
- Vireio Perception Developer
- Posts: 491
- Joined: Sat May 19, 2012 5:20 am
- Location: BB, Slovakia
Re: Cyberith Virtualizer ODT
Very interested in this one. The crouching jumping looked verfy natural.. What are the commercial aspirations?
- Moriarty
- Two Eyed Hopeful
- Posts: 69
- Joined: Wed Sep 05, 2012 5:04 pm
Re: Cyberith Virtualizer ODT
Very interesting support structure. This device should make babies with the WizDish or Omni.
- museumsteve
- Binocular Vision CONFIRMED!
- Posts: 201
- Joined: Tue Mar 26, 2013 5:29 am
Re: Cyberith Virtualizer ODT
Looks brilliant
-
- Cross Eyed!
- Posts: 101
- Joined: Wed Dec 26, 2012 7:10 am
Re: Cyberith Virtualizer ODT
Is that your device djesko?
This looks great, the sliding action on the support bars is exactly what I was looking for, it looks very natural, small, but I do think the base material needs some work, or alternative material for the bottom of the feet.
Looking very good, can't wait to see this projects developments.
good luck
This looks great, the sliding action on the support bars is exactly what I was looking for, it looks very natural, small, but I do think the base material needs some work, or alternative material for the bottom of the feet.
Looking very good, can't wait to see this projects developments.
good luck
- brantlew
- Petrif-Eyed
- Posts: 2221
- Joined: Sat Sep 17, 2011 9:23 pm
- Location: Menlo Park, CA
Re: Cyberith Virtualizer ODT
On a side note: its really great to see the Tuscany demo starting to become the "Hello World" of VR - which was sort of its intention in the first place. We can all thank Andrew Reisse for creating this little demo from which so many projects are being based on.
- djesko
- One Eyed Hopeful
- Posts: 10
- Joined: Fri May 31, 2013 3:34 pm
- Location: Scotland
Re: Cyberith Virtualizer ODT
Nah man it aint mine, just spotted it on Reddit.shent1080 wrote:Is that your device djesko?
This looks great, the sliding action on the support bars is exactly what I was looking for, it looks very natural, small, but I do think the base material needs some work, or alternative material for the bottom of the feet.
Looking very good, can't wait to see this projects developments.
good luck
Star Citizen Oculus Rift clan [HMD]
-
- Cross Eyed!
- Posts: 101
- Joined: Wed Dec 26, 2012 7:10 am
Re: Cyberith Virtualizer ODT
Good find!
- colocolo
- Diamond Eyed Freakazoid!
- Posts: 790
- Joined: Mon Jun 04, 2012 1:25 am
Re: Cyberith Virtualizer ODT
Cyberith new Virtualizer design
https://www.youtube.com/watch?v=Ljf64jyKbW8
https://www.youtube.com/watch?v=Ljf64jyKbW8
- NightlHlawk
- One Eyed Hopeful
- Posts: 35
- Joined: Tue Jun 11, 2013 8:42 am
Re: Cyberith Virtualizer ODT
Another video showing more movement samples. The above video design definitely looks more elegant. Getting pretty excited to see how this turns out.
http://www.youtube.com/watch?v=JjlWzuVo6Ns
http://www.youtube.com/watch?v=JjlWzuVo6Ns
-
- One Eyed Hopeful
- Posts: 40
- Joined: Wed Sep 19, 2012 8:24 am
Re: Cyberith Virtualizer ODT
The up and down is complete progress...I dont like the idea like you are pushing a mail cart around all the time...running across the desert or through the jungle in an entire map is going to be stressful enough without having to push something along the way.
I feel like maybe walking on ball bearings that could spin in any direction or those roller skate shoes....somethign to make the movement easier..
with ball bearings your could use magnetic force to create tension for hills and what not as well as to keep them somewhat in place
I feel like maybe walking on ball bearings that could spin in any direction or those roller skate shoes....somethign to make the movement easier..
with ball bearings your could use magnetic force to create tension for hills and what not as well as to keep them somewhat in place
-
- Binocular Vision CONFIRMED!
- Posts: 251
- Joined: Wed Apr 10, 2013 2:06 am
Re: Cyberith Virtualizer ODT
very interesting!
This actually makes me consider a whizzdish and make the pillar thingies myself.
whizzdish lowfriction surface and shoes should kill the whole pushing a cart around aspect.
wondering if with amhipholder pillar thingie one could actually walk in the whizzdish instead of skating.....
This actually makes me consider a whizzdish and make the pillar thingies myself.
whizzdish lowfriction surface and shoes should kill the whole pushing a cart around aspect.
wondering if with amhipholder pillar thingie one could actually walk in the whizzdish instead of skating.....
Starcitizen - Elite:Dangerous - Xing - Gallery: Six Elements - Among the sleep - Theme Park Studio - The Stomping Land - Son of Nor - Obduction - NOWHERE - Kindom Come : Deliverance - Home Sick - prioVR
- colocolo
- Diamond Eyed Freakazoid!
- Posts: 790
- Joined: Mon Jun 04, 2012 1:25 am
Re: Cyberith Virtualizer ODT
Wow, you know what. You could make out of this design a very foldable one.
Fold the 4 poles inwards and make the support ring strucutre also more foldable and you could store it easily under your bed.
Now, if the effort it takes to walk isn't too big, it could be the best cheap material solution for
a very good ODT.
Looking forward to see what happens with this device.
Fold the 4 poles inwards and make the support ring strucutre also more foldable and you could store it easily under your bed.
Now, if the effort it takes to walk isn't too big, it could be the best cheap material solution for
a very good ODT.
Looking forward to see what happens with this device.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Wed Jan 30, 2013 11:38 am
- Location: Bellingham
- Contact:
Re: Cyberith Virtualizer ODT
Neat! looks waaaay better than wizdish
-
- Cross Eyed!
- Posts: 151
- Joined: Wed Apr 18, 2012 3:27 pm
- Contact:
Re: Cyberith Virtualizer ODT
Good find. This looks like it might work well with the WizDish, which would take care of walking without injuring yourself. The issue I've had with frames is that they are only one option, it's a project in it's own right, and someone may already have done it. I agree with what blazespinnaker says about harnesses but this is being used in a very similar way to what climbing harnesses were designed for. It isn't trying to support his weight as he runs about.
Anyone know how to get hold of him?
Anyone know how to get hold of him?
- whelanweb
- Cross Eyed!
- Posts: 103
- Joined: Thu Mar 21, 2013 3:56 pm
- Location: Waterford, Ireland
- Contact:
Re: Cyberith Virtualizer ODT
I really like this. Looks alot like the prototype im building great work. The friction looks quite high but that's an easy fix.
- brantlew
- Petrif-Eyed
- Posts: 2221
- Joined: Sat Sep 17, 2011 9:23 pm
- Location: Menlo Park, CA
Re: Cyberith Virtualizer ODT
The second video is a lot more informative. The slow creeping motion seems to demonstrate that it doesn't take too much effort to slide the feet which was a concern that I had. All in all it seems like an impressive design and just needs a little refinement. Embed a couple of sensors in the harness ring and it looks like it could be a great solution.
- blazespinnaker
- Certif-Eyed!
- Posts: 541
- Joined: Sat Sep 01, 2012 11:53 pm
Re: Cyberith Virtualizer ODT
It's an interesting innovation with the telescoping harness, but the constant leaning over like that could lead to pretty bad back posture and back injury.
One of the things I do like with these solutions though, is that they look they require real effort. I'm having trouble getting my heart rate up enough (too much exercise lately!) with walking/jogging in place.
I'm working on some algorithms that make it require more rapid walk movements in the IMU to trigger a keypress. Hopefully that works.
Another thing I'd like to mention is that I've been doing a lot of stretching exercise before any VR workout now. My achilles tendons are lovin' me for it.
One of the things I do like with these solutions though, is that they look they require real effort. I'm having trouble getting my heart rate up enough (too much exercise lately!) with walking/jogging in place.
I'm working on some algorithms that make it require more rapid walk movements in the IMU to trigger a keypress. Hopefully that works.
Another thing I'd like to mention is that I've been doing a lot of stretching exercise before any VR workout now. My achilles tendons are lovin' me for it.
Gear VR: Maybe OVR isn't so evil after all!
- NightlHlawk
- One Eyed Hopeful
- Posts: 35
- Joined: Tue Jun 11, 2013 8:42 am
Re: Cyberith Virtualizer ODT
Yeah, the second video definitely allayed some concerns that came up when in the first video it looked like he had to push fairly hard to get going.brantlew wrote:The second video is a lot more informative. The slow creeping motion seems to demonstrate that it doesn't take too much effort to slide the feet which was a concern that I had. All in all it seems like an impressive design and just needs a little refinement. Embed a couple of sensors in the harness ring and it looks like it could be a great solution.
The creator stated he would look into a possible seating solution as well.
- blazespinnaker
- Certif-Eyed!
- Posts: 541
- Joined: Sat Sep 01, 2012 11:53 pm
Re: Cyberith Virtualizer ODT
Another concern I have about this ODT is jumping, especially if you reduce the friction on the base plate. Because there isn't much vertical support, I wonder what would happen if his feet slid out beneath him.
With my walk in place ODT, even as confident as I've got, jumping is still a bit nerve wracking with no vertical support. I tend to just keep it to small, cautious hops.
With my walk in place ODT, even as confident as I've got, jumping is still a bit nerve wracking with no vertical support. I tend to just keep it to small, cautious hops.
Gear VR: Maybe OVR isn't so evil after all!
-
- Binocular Vision CONFIRMED!
- Posts: 251
- Joined: Wed Apr 10, 2013 2:06 am
Re: Cyberith Virtualizer ODT
Hmmmhhhh, looks like the harness& poles construction wouldn't save you if you loose your equilibrium though..
Maybe add a ceiling mounted safety rope. Would have to be pretty short though. Hitting one of the poles with your face/eyes/teeth/throat.... nogood at all...
Maybe add a ceiling mounted safety rope. Would have to be pretty short though. Hitting one of the poles with your face/eyes/teeth/throat.... nogood at all...
Starcitizen - Elite:Dangerous - Xing - Gallery: Six Elements - Among the sleep - Theme Park Studio - The Stomping Land - Son of Nor - Obduction - NOWHERE - Kindom Come : Deliverance - Home Sick - prioVR
-
- Binocular Vision CONFIRMED!
- Posts: 345
- Joined: Fri Nov 18, 2011 1:32 am
Re: Cyberith Virtualizer ODT
Could you please post a picture of your walk in place ODT? I keep trying to visualize it but I'm not really sure what it is you're talking aboutblazespinnaker wrote:Another concern I have about this ODT is jumping, especially if you reduce the friction on the base plate. Because there isn't much vertical support, I wonder what would happen if his feet slid out beneath him.
With my walk in place ODT, even as confident as I've got, jumping is still a bit nerve wracking with no vertical support. I tend to just keep it to small, cautious hops.
- colocolo
- Diamond Eyed Freakazoid!
- Posts: 790
- Joined: Mon Jun 04, 2012 1:25 am
Re: Cyberith Virtualizer ODT
remosito wrote:Hmmmhhhh, looks like the harness& poles construction wouldn't save you if you loose your equilibrium though..
Maybe add a ceiling mounted safety rope. Would have to be pretty short though. Hitting one of the poles with your face/eyes/teeth/throat.... nogood at all...
easiest way to avoid this, would be simply to enlarge the poles via four telescope poles (so that the foldability remains). This way you don't have a chance anymore to hit them with your eyes.
And if you fall over knee protectors should be enough.
Problem solved!
- blazespinnaker
- Certif-Eyed!
- Posts: 541
- Joined: Sat Sep 01, 2012 11:53 pm
Re: Cyberith Virtualizer ODT
PM me for the apps, you can try it out yourself.Zoide wrote:Could you please post a picture of your walk in place ODT? I keep trying to visualize it but I'm not really sure what it is you're talking aboutblazespinnaker wrote:Another concern I have about this ODT is jumping, especially if you reduce the friction on the base plate. Because there isn't much vertical support, I wonder what would happen if his feet slid out beneath him.
With my walk in place ODT, even as confident as I've got, jumping is still a bit nerve wracking with no vertical support. I tend to just keep it to small, cautious hops.
Depends on how you fall.And if you fall over knee protectors should be enough.
Gear VR: Maybe OVR isn't so evil after all!
-
- One Eyed Hopeful
- Posts: 29
- Joined: Thu Oct 18, 2012 10:45 am
- Location: Lithuania
Re: Cyberith Virtualizer ODT
after multiple watchings of videos of virtux and this concept side bise-side,
there are few hard physics-facts that I think cannot really be overcome:
the further away you place your forward foot on a completely flat surface, the more effort it takes
to slide it back to the center, therefore the less natural/effortless the walk will be.
Virtux fights this by titling that surface upward and letting gravity of your body do large part
of that need work (of sliding that foot back). To me, in the videos of virtux results are clear:
the gamer extends his leg far further and slides them back much easier, exibiting
natural and relaxed long strides ('walk in the park' style), whereas in Cyberith one has to
resort to
* either very small leg extensions ('rabbit walk')
* or goes into full-on jogging mode to generate that extra force to fight the flatness of the surface
However, Cyberths vertical struts are where it wins hands down against the Virtuix,
ideally I would want to have Virtux' concave sliding surface combined with Cyberths
free-motion vertical struts, that could just be a killer combo (with addition of Rift + Hydra of cause!)
there are few hard physics-facts that I think cannot really be overcome:
the further away you place your forward foot on a completely flat surface, the more effort it takes
to slide it back to the center, therefore the less natural/effortless the walk will be.
Virtux fights this by titling that surface upward and letting gravity of your body do large part
of that need work (of sliding that foot back). To me, in the videos of virtux results are clear:
the gamer extends his leg far further and slides them back much easier, exibiting
natural and relaxed long strides ('walk in the park' style), whereas in Cyberith one has to
resort to
* either very small leg extensions ('rabbit walk')
* or goes into full-on jogging mode to generate that extra force to fight the flatness of the surface
However, Cyberths vertical struts are where it wins hands down against the Virtuix,
ideally I would want to have Virtux' concave sliding surface combined with Cyberths
free-motion vertical struts, that could just be a killer combo (with addition of Rift + Hydra of cause!)
-
- Binocular Vision CONFIRMED!
- Posts: 345
- Joined: Fri Nov 18, 2011 1:32 am
Re: Cyberith Virtualizer ODT
Makes sense! At worst you'd bend out the poles, but at least you wouldn't impale yourselfcolocolo wrote:remosito wrote:Hmmmhhhh, looks like the harness& poles construction wouldn't save you if you loose your equilibrium though..
Maybe add a ceiling mounted safety rope. Would have to be pretty short though. Hitting one of the poles with your face/eyes/teeth/throat.... nogood at all...
easiest way to avoid this, would be simply to enlarge the poles via four telescope poles (so that the foldability remains). This way you don't have a chance anymore to hit them with your eyes.
And if you fall over knee protectors should be enough.
Problem solved!
- colocolo
- Diamond Eyed Freakazoid!
- Posts: 790
- Joined: Mon Jun 04, 2012 1:25 am
Re: Cyberith Virtualizer ODT
Quote:
Depends on how you fall.
Well, i expect all humans using their hands to cushion the impact no matter how they fall.
Thats a very normal reflex and wouldn't let fall anyone directly onto his nose.
Depends on how you fall.
Well, i expect all humans using their hands to cushion the impact no matter how they fall.
Thats a very normal reflex and wouldn't let fall anyone directly onto his nose.
- blazespinnaker
- Certif-Eyed!
- Posts: 541
- Joined: Sat Sep 01, 2012 11:53 pm
Re: Cyberith Virtualizer ODT
This isn't necessarily true. The force vector going down and generating friction will be less at an angle. As your feet gets closer to the center underneath your body, the more force required to slide it.VRus wrote:the further away you place your forward foot on a completely flat surface, the more effort it takes
to slide it back to the center,
I'll agree though the dish approach does make it easier to walk. It's a bit awkward though, if you have ever tried it. It feels a bit weird having your feet slide like that. Not a very natural feeling. Hopefully what Jan has done with the plunge pin and the friction pads improves that feeling.
The fact that Cyberith doesn't need special shoes is pretty cool.
Gear VR: Maybe OVR isn't so evil after all!
-
- One Eyed Hopeful
- Posts: 29
- Joined: Thu Oct 18, 2012 10:45 am
- Location: Lithuania
Re: Cyberith Virtualizer ODT
exactly for Virtuix and opposite for Cyberithblazespinnaker wrote:This isn't necessarily true. The force vector going down and generating friction will be less at an angle.
true for both devices. So I don't quite get how it doesn't necessarily require more force, to meblazespinnaker wrote:As your feet gets closer to the center underneath your body, the more force required to slide it.
it quite obviously does - if only due to the fact that on a flat surface at the beginning of your stride (heel touch-down)
you lower your entire body, and at the end the slide (heel at the center) you end up lifting your entire body - that's work (force times vert.dist. traveled),
whereas on concave dish your hips and body remain more less stationary during the entire stride - that's where the 'energy savings'
come from, note how in Cyberith's demo one keeps his knees constantly bent - to allow for necessary larger force generation (I do the same
thing while ice-skating, you cannot skate fast with your legs relaxed and straight)
I can see both devices are trade-offs in different ways:
* Virtux - less force, but less natural stride-geometry ('hamster style')
* Cyberrith - more force, but more natural stride-geometry
guess there's no 'free-lunch' with OTDs, at least not yet...