Nvidia 3080 or 3080 TI 3D vision support using modded drivers

[3DNovice]

...

[whyme466]

Well, my 2080Ti's fluid pump is working today?? I read that the typical life for these types of pumps is 3-5 years, and I have had my card for 3 years now. I found and ordered a hybrid replacement kit on eBay (for other EVGA cards), but the fluid pump/radiator should work for my card, with appropriate thermal paste. At some point, our aging unsupported hardware will fail beyond repair and deny access to the wonderful 3D Vision gaming world - emphasizing the growing need for some type of alternative...

[RAGEdemon]

Usually what fails is the coolant levels becoming too low and kill the pump because it is running on air bubbles instead of coolant (air lock). It's not a difficult job to simply replace and fill up the entire coolant. The pump itself ought to last 10 years +. The radiator and pipes will last a life-time, assuming they don't get abused.

https://www.youtube.com/watch?v=BbGomv195sk

[whyme466]

Thanks for the suggestions, RAGEdemon. I learned the importance of proper pump/radiator placement with my prior hybrid cards, so my current 2080Ti hybrid has had no air bubble/lock problems to shorten card life. Unfortunately, for closed loop hybrid cooling like my card has, one CANNOT add or replace coolant, just replace the entire closed loop system.

[RAGEdemon]

No worries - best of luck. BTW, you can top up any AIO with coolant: https://www.youtube.com/watch?v=cvfSj6cZf5Q

Personally, I would try this before purchasing another hybrid cooling kit, but I appreciate most people wouldn't bother due to the hassle

[floph]

Note sure if I understood correctly. 3000 series cards still work with S3D, 3D TVs and projectors ? That would be OK for me as I only have a 3D projector.

[3DNovice]

...

[Lysander]

AC4 running on a 3090 via Flugan's wrapper (SBS):

https://www.youtube.com/watch?v=maweQ_MS-ZE

It's confirmed to work well in VR via SBS, too. I know some of you have SBS setups on 30xx series cards, it would be helpful to Flugan, I think, if you tried some of the fixes from Helixmod, see how other games behave. Caveat is, the fixes can't use regex as his wrapper doesn't support that (yet) but there must be plenty of fixes without regex functionality.

[Losti]

AC4 running on a 3090 via Flugan's wrapper (SBS):

https://www.youtube.com/watch?v=maweQ_MS-ZE

It's confirmed to work well in VR via SBS, too. I know some of you have SBS setups on 30xx series cards, it would be helpful to Flugan, I think, if you tried some of the fixes from Helixmod, see how other games behave. Caveat is, the fixes can't use regex as his wrapper doesn't support that (yet) but there must be plenty of fixes without regex functionality.

Only very old one only. Even with some manual fixes reg ex is isses in nearly every fix sind migoto supported this.

[Lysander]

AC4 running on a 3090 via Flugan's wrapper (SBS):

https://www.youtube.com/watch?v=maweQ_MS-ZE

It's confirmed to work well in VR via SBS, too. I know some of you have SBS setups on 30xx series cards, it would be helpful to Flugan, I think, if you tried some of the fixes from Helixmod, see how other games behave. Caveat is, the fixes can't use regex as his wrapper doesn't support that (yet) but there must be plenty of fixes without regex functionality.

Only very old one only. Even with some manual fixes reg ex is isses in nearly every fix sind migoto supported this.

He's working on adding regex now, so hopefully porting the functionality from 3dmigoto won't be too hard.

[Losti]

So i can use this wrapper and play dx12 games in geometry 3D via Projektor for example ?

[Lysander]

No, this is only for DX11, but you can use 30xx series cards.

[spin1]

No, this is only for DX11, but you can use 30xx series cards.

Nvidia RTX 3000 series GPUs now work with DX11 games? How?

[Lysander]

No, this is only for DX11, but you can use 30xx series cards.

Nvidia RTX 3000 series GPUs now work with DX11 games? How?

With Flugan's wrapper but this is really early work in progress and most games still have issues. AC4 works the best apparently.

https://github.com/Flugan/Geo3D-11

[Necropants]

From what I understand Flugans new wrapper is SBS only and won't work for those of us who only have 3dvision capable hardware.

[whyme466]

Top/bottom is better than SBS for viewing 3D (stereo baseline axis preserved at full resolution with Top/bottom). Could Flugan be convinced to change to support Top/bottom format?

By the way, prices for current GPUs like 3080 are finally declining. See https://www.tomshardware.com/news/gpu-pricing-index, for example.

[djgrege]

I believe Flugan actually uses frame sequential in his wrapper, albeit alternative eye frames. Then he uses the reshade module 3DtoElse, to convert to SBS for YouTube vids. This module can also be used for TnB.

[spin1]

Frame sequential, top/bottom, SBS...I don't think most people know what any of that means. So how can RTX 3000 series card owners get Nvidia 3D Vision working with DX11 games (regular 3D Vision monitor - Dell S2716DG).

[Lysander]

He's right, I forgot about that SBS detail. It won't work with 3dv, sorry.

[bd32]

As the guy that started this thread almost two years ago... it sounds like we may finally have a solution for 3d on 30xx cards, thanks to work on geo-11. I have still not tested myself, but looking forward to using it on both my LG C6P TV and PG278QR 3d vision setups. Also only have 2080TIs at this point.. may finally be time to upgrade.

Thanks to the 3d community for the great work and keeping our gaming in real 3D (stereoscopically speaking, if that is a word)!!!!

[3DNovice]

....

[Kaizen777]

THAT IS AMAZING!!!!!! I LOVE SMART PEOPLE!!! Thank you so much for sharing this incredible news!!!

[aofelix]

To update this thread for those that come across it, new drivers can be used up to 452.06 with little issue, though 425.31 has better performance.
425.31 was the last "official driver" and does not require hacking in the 3D Vision driver, whereas anything past it requires that 3D Vision drivers be hacked in.

Going past 452.06 requires the use of a stereoscopic call layer called Geo-11 that was recently released on June 21, 2022.
https://helixmod.blogspot.com/2022/06/a ... river.html Download
viewtopic.php?t=26264 Feedback thread for Geo-11 3D layer
Without Geo-11 there is no DirectX 11 support in newer drivers past 452.06.
If you have a 3D Vision monitor/glasses, you'll need to hack the 3D Vision drivers into the newer drivers.
If using a Side by Side or Top and Bottom display, the 3D Vision Drivers are no longer needed, just Geo-11, the Helix and 3DMigoto fixes are still required to correct game issues.

If you have an issue with a game and Geo-11 please search the forum for an existing thread and post there, just type "Geo-11 gamename"

To install newer drivers use 3D Fix Manager or [TOOL] 3D-Vision Driver Changer - Quick and easy 3D-Driver and Profile Installation - V4.20 [DCH/STD/CUSTOM] or
the method by neovad viewtopic.php?t=23484

Note: in games that run poorly due to the 3 core bug, Geo-11 can give quite a performance boost in most cases on all driver versions

Is there anyway to playback 3d ISOS for films mvc on the newer drivers?