press key to change convergence not working with geo-11 v0.6.90

[jia1009]

I am add this code to d3dx.ini, but convergence always lock in 50. I've disabled auto-convergence.
[Key13]
Key=XB_RIGHT_THUMB
type=cycle
convergence=37, 60
transition=100
transition_type=cosine

[jia1009]

Anyone help me? Thank you

[The_Nephilim]

Are you able to go past 50 with a manual cycle? which game are you playing here? Convergence maybe locked either in game or a profile..

[jia1009]

Are you able to go past 50 with a manual cycle? which game are you playing here? Convergence maybe locked either in game or a profile..

I am playing The Elder Scrolls V: Skyrim Special Edition

[The_Nephilim]

OK are you able to manually cycle the convergence past 50?

[The_Nephilim]

https://helixmod.blogspot.com/2016/11/t ... ecial.html

Are you using this newer fix?

[jia1009]

https://helixmod.blogspot.com/2016/11/t ... ecial.html

Are you using this newer fix?

Yes, I am using the newer fix. When I press Ctrl + F6 or Ctrl + F5, convergence will be changed

[The_Nephilim]

hey see this it is in the new 3d fix I posted, it seems the convergence was locked too 50 let me look at the ini file



Changelog (last update: 2022-07-27)
v13:
- Changed default convergence to 50.

[The_Nephilim]

OK the shaderhackers locked the convergence to 50.

to fix this goto the d3dx.ini file w/Notepad++ and goto line 1640 and you should se this: StereoConvergence = 50

you can just REM that line out with a semicolon and then the hotkey you input should goto 60 now..

[The_Nephilim]

Hotkeys
- "F1": five convergence presets (16, 25, 35, 50, 80). 50 by default. Change them in "d3dx.ini" if you want different values. Only working if "dm_auto_convergence" is disabled in "d3dxdm.ini".


there is also this that was listed on the blog page.. so you can omit the auto convergance and you will have F1 with the presets and you should be able to change those to what you want..

[jia1009]

Hotkeys
- "F1": five convergence presets (16, 25, 35, 50, 80). 50 by default. Change them in "d3dx.ini" if you want different values. Only working if "dm_auto_convergence" is disabled in "d3dxdm.ini".


there is also this that was listed on the blog page.. so you can omit the auto convergance and you will have F1 with the presets and you should be able to change those to what you want..

I am using the v15 version, I tried your solution，dm_auto_convergence = 0, but it's still going back to 50. maby it's a bug

[The_Nephilim]

OK the shaderhackers locked the convergence to 50.

to fix this goto the d3dx.ini file w/Notepad++ and goto line 1640 and you should se this: StereoConvergence = 50

you can just REM that line out with a semicolon and then the hotkey you input should goto 60 now..

see the above quote it is locked at 50. do not forget to save the file after you make the change.. CTRL + S

[jia1009]

OK the shaderhackers locked the convergence to 50.

to fix this goto the d3dx.ini file w/Notepad++ and goto line 1640 and you should se this: StereoConvergence = 50

you can just REM that line out with a semicolon and then the hotkey you input should goto 60 now..

see the above quote it is locked at 50

Yes, i can editor StereoConvergence = 60 or other value, but in game i can not dynamic modification using hotkey, unless using ctrl + F5 and Ctrl + F6, old version workd very good

[The_Nephilim]

does the F! key change the convergance? dont lock it too a number you have to REM it out.. if it is set to stereoconvergence = 60 that is what it will be set at that is it you can not change what was set there you need to REM it out with the semicolon key.. then it will change with the hotkey..

[jia1009]

does the F! key change the convergance? dont lock it too a number you have to REM it out.. if it is set to stereoconvergence = 60 that is what it will be set at that is it you can not change what was set there you need to REM it out with the semicolon key.. then it will change with the hotkey..

Neither can the F1 key， It could change by a few microseconds. then still go back to default value.

[The_Nephilim]

OK did you REM out line 1640 in the d3dx.ini?

[jia1009]

OK did you REM out line 1640 in the d3dx.ini?

Yes, I did, like this

StereoProfile = 1
;StereoConvergence = 50
StereoTextureEnable = 0x00000023
StereoFlagsDX10 = 0x00004008
0x70f8e408 = 0x00000006
0x70092d4a = 0x00000006

Thanks for your help, i am using old version now, it works greate

[The_Nephilim]

well OK Have Fun

[masterotaku]

If you don't disable "dm_auto_convergence" in "d3dxdm.ini", no wonder your convergence hotkeys didn't work.